NE plate chain elevator tail

NE plate chain elevator tail

NE chain hoist tail

The NE plate chain hoist is a lifting device for plate chains and gravity induced unloading. The machine adopts an inflow feeding method, which flows the material into the hopper through a plate chain and unloads it by itself under the gravity of the material. The main technical parameters of JB3926-85 are load standards. The chain is a higher strength plate chain made of alloy steel, and it is very good. The driving part adopts a hard toothed reducer.

NE plate chain bucket elevator; Composed of the operating part (hopper and traction belt), the upper part of the transmission roller, the lower part of the tension roller, the middle shell, the driving device, the reverse braking device, etc., it is suitable for conveying loose density 1.5t/m3 powder, granules, small pieces of unpolished, semi ground bulk materials such as coal, sand, coke, cement, crushed ore, etc. upwards.

NE plate chain hoist structure form: TD bucket elevator transmission device has two forms: YZ reducer ZQ (or YY) reducer. The reducer has low noise, smooth operation, floating spindle, and can be installed with stress. The YZ axis reducer is directly installed on the spindle head, saving the transmission platform, coupling, etc., making the structure compact and lightweight. There is an irregular roller stopper inside to stop it.

NE plate chain hoist is a widely used vertical lifting equipment, suitable for vertical transportation of medium, large, and grinding materials (such as limestone, cement clinker, gypsum, and lump coal), with material temperatures below 250 ℃.

The NE plate chain elevator is a new product that meets the standards of the Ministry of Machinery (JB3926-85). Adopting self loading and gravity unloading. The chain is an alloy steel plate chain, but. The driving part adopts a hard toothed reducer.

The characteristics of NE chain hoist:

1. Good sealing and minimal environmental pollution.

2. Easy to operate, easy to maintain, with few vulnerable parts.

3. Due to minimal energy-saving maintenance and low usage costs, the usage cost is low.

4. Operation, complete machine operation, good sealing. Less environmental pollution.

5. Structural port type with good accuracy. The shell is folded and reinforced in the middle, then welded, with good rigidity and beautiful appearance.

6. Compared with other elevators with the same lifting capacity, the mechanical size of this elevator is smaller.

7. This series of elevators has multiple specifications ranging from NE15 to NE800. The upgrade range is 15-800m3/h.

8. Easy to operate, minimal maintenance, and fewer vulnerable parts. The conveyor chain is a sleeve roller chain that induces gravity discharge and is used to vertically lift various powders and block shaped particles.

NE chain hoist tail

NE plate chain elevator tail