NE type multifunctional hoist

NE multifunctional elevator is an elevator equipment that uses plate chains and gravity induced unloading. The machine adopts an inflow type feeding system, with materials flowing into the hopper and bucket elevator; Unload the material by itself under the action of gravity. The main technical parameters of JB3926-85 are load standards. Chain is a high-strength and excellent plate chain made of alloy steel. The driving part adopts a hard toothed reducer.

Structure composition of NE type multifunctional hoist:

The NE type multifunctional hoist consists of operating components, driving device, upper device, middle shell, and lower device.

1. Operating components: composed of a hopper and a one-to-one chain, single row chain is used for NE30 and below, and double row chain is used for NE50~NE800.

2. Drive device: Multiple drive combinations are used to drive (depending on the actual needs of the user). The drive platform is equipped with maintenance racks and railings. The driving device is divided into left and right sides.

3. Upper device: Install track (double row chain), backstop, and discharge port equipped with anti backflow rubber plate.

4. Middle section: Some middle sections are equipped with tracks (double chains) to prevent the chain from swinging during operation.

5. Lower device: The bucket elevator is equipped with an automatic tensioning device.

Selection and inspection of components for NE type multifunctional hoist:

1. Choose a high filling hopper.

2. Choose alloy steel sleeve roller chain. Fixing the pin shaft to the outer link plate and fixing the sleeve to the inner link plate can reduce the wear of the load-bearing components.

3. The head sprocket is composed of a wheel hub and a split ring gear. The tail sprocket adopts smooth teeth, which can prevent tooth jumping and wear caused by head tail asynchrony.

4. After the parts are processed, German mesh bag type automatic flipping heat treatment equipment is used for uniform carburizing and quenching.

5. Adopting general inspection and tensile testing methods to fully protect technical requirements.

The NE type multifunctional hoist has the following characteristics:

1. Good sealing and minimal environmental pollution.

2. Easy to operate, easy to maintain, with few vulnerable parts.

3. Due to minimal energy-saving maintenance and low usage costs, the usage cost is low.

4. Good operation, design principles, protection of the entire machine, good sealing. There is less environmental pollution.

5. Port style structure with good precision. The shell is folded and reinforced in the middle, then welded, with good rigidity and beautiful appearance.

6. Compared with other hoists, the mechanical size of the hoist is smaller.

7. This series of elevators has multiple specifications ranging from NE15 to NE800. The upgrade range is 15-800m3/h.

8. Easy to operate, minimal maintenance, and fewer vulnerable parts. The conveyor chain is a sleeve roller chain that induces gravity discharge and is used to vertically lift various powders and block shaped particles.