TH300 bucket elevator

Good sales, working principle

The TH300 bucket elevator is a circular chain bucket elevator that uses mixed or gravity unloading and excavation loading. The traction component adopts an alloy steel height ring chain, and the hopper scoops up the material from the storage below. As the chain rises to the top, it passes around the top wheel and flips down to pour the material into the receiving groove. The constant force automatic tensioning is achieved through the internal heavy hammer box, and the middle casing is divided into single and double channel forms. The lower part adopts a gravity automatic tensioning device, which can maintain a constant tension and avoid slipping or chain detachment.

Excellent, distinctive advantages

1. Low driving power: Adopting inflow feeding, induction unloading, and densely arranged large capacity hoppers, there is almost no material return or excavation during material lifting, resulting in low ineffective power.

2. Wide improvement scope: There are fewer requirements for the types and characteristics of materials, which can not only achieve practical effects on general powders and small particle materials such as grains and fertilizers, but also on materials with high grinding properties such as crushed stones and coal blocks. The bulk density of the applicable material is less than 1.5. t/m³。

Good operation performance: The excellent design principles and processing methods protect the excellent operation of the whole machine, with a fault free time of over 20000 hours and smooth operation. It can reach a high lifting height of up to 30m.

4. Long service life: The feeding of the elevator adopts an inflow type, which does not require digging with a bucket, and there is little squeezing and collision between materials. In the design, materials rarely scatter during feeding and unloading, reducing mechanical wear.

Good sealing performance: can prevent dust from flying, reduce environmental pollution, and make the working environment cleaner.

Thirdly, the application industry

It is mainly suitable for continuous vertical lifting of powders, granules, and small pieces of materials, and can be widely used in industries of various scales such as feed mills, flour mills, rice mills, oil mills, starch mills, grain depots, port terminals, etc. It can also be used in industries such as chemical, metallurgical, and building materials.

Installation and maintenance

1. Installation: During installation, it is necessary to protect the foundation firmly and ensure that the verticality and levelness of the hoist meet the requirements. At the same time, attention should be paid to the tension of the chain and the installation position of the hopper to avoid problems such as card and material leakage.

2. Maintenance: Regularly check the wear of the chain, adjust the tension or replace the chain in a timely manner; Check if the hopper is damaged or loose, and replace it promptly if there are any problems; Regularly lubricate and maintain components such as sprockets and bearings to ensure proper operation of the equipment.