Cement bucket elevator

There are 11 types of cement bucket elevators: NE15, NE30, NE50, NE150, NE200, NE300, NE400, NE500, NE600, and NE800.

The cement bucket elevator has the following characteristics:

1. The scope of improvement is broad. This bucket elevator; The requirements for material type, characteristics, and block size are relatively low. It can not only achieve practical effects on general powders, particles, and block materials, but also on high grinding materials. The temperature of the material is ≤ 250 degrees.

2. Large conveying capacity. This series of elevators has multiple specifications ranging from NE15 to NE800. The upgrade range is 15-800m3/h.

3. The driving power is small. The elevator adopts inflow feeding, gravity induced discharge, and densely arranged large capacity hopper conveying, with low chain speed and large lifting capacity. When lifting materials, there is very little material return and excavation, resulting in low ineffective power and a power consumption of 70% of that of a chain hoist.

4. Long service life. The feeding of the elevator adopts an inflow type, without the need for bucket excavation, and there is almost no compression or collision between materials. The design of the machine protects materials from overflowing during feeding, lifting, and unloading processes, reducing mechanical wear and tear. The conveyor chain adopts a plate chain with relatively high strength and wear resistance (mainly based on actual reports) (mainly based on actual reports), which greatly extends the service life. During normal use, the service life of the conveyor chain exceeds 5 years.

5. Raise the height. This series of hoist chains has low speed and smooth operation. They use plate chains with relatively high strength performance (based on actual reports) and alloy steel chains (based on actual reports), which can achieve a high lifting height (40m height).

6. Good sealing performance. Less environmental pollution.

7. The operation is good. The excellent design principle protects the excellent operation of the whole machine, with a fault free time of over 30000 hours.

8. Easy to operate, easy to maintain, with few vulnerable parts.

9. The mechanical size is small. The mechanical size of this elevator is smaller than other elevators.

10. Structural port type with good accuracy. The shell is folded and reinforced in the middle, then welded, with good rigidity and beautiful appearance.

11. Low usage cost. Due to minimal energy-saving maintenance, the usage cost is relatively low.