Product details of welding smoke dust collector:
Welding smoke dust collector, also known as welding smoke dust collector or welding smoke purifier, is an environmentally friendly equipment specifically used to treat smoke and dust generated in industrial production processes. Here is a detailed introduction about it:
Good sales, working principle
Through the gravitational force of the fan, the dusty exhaust gas is sucked into the air inlet of the equipment through the universal vacuum hood, and the flame arrester at the air inlet can block sparks. When the smoke and gas enter the settling chamber, the coarse dust is directly reduced to the ash hopper under the action of gravity, and the particulate smoke is captured by the filter element on the outer surface. After being filtered and purified by the filter element, the clean gas flows into the clean room through the filter element, then further purified by adsorption through the activated carbon filter, and finally discharged through the air outlet to meet the standard.
Excellent, main types
Mobile dry smoke dust collector: movable, the suction arm can rotate 360 degrees freely, can hover and be fixed at any time, and can be flexibly adjusted according to the working position. It is suitable for places where the working point is not fixed, such as welding and polishing.
Centralized dry smoke dust collector: usually used in large factories or workshops, it can simultaneously process smoke and dust generated from multiple operating points. The smoke and dust from each operating point can be collected through a pipeline system and centrally processed in large-scale dust removal equipment, with a large processing air volume and good purification efficiency.
Thirdly, product features
Filter: Filter cartridges made of film or fine fiber materials are commonly used, which have good barrier efficiency against small dust particles and a dust removal efficiency of over 90%.
2. Convenient dust cleaning: Pulse dust cleaning method is usually used, which uses compressed air to regularly and accurately spray the filter cartridge, so that the dust adhering to the surface of the filter cartridge can fall off at a suitable speed and fall into the ash hopper, which can maintain the low resistance operation state of the equipment and extend the service life of the filter cartridge.
Compact structure: relatively small in size, flexible in installation, able to adapt to various places with limited space, and will not cause too much interference to production operations.
4. Strong targeting: Specially designed with the characteristics of low viscosity and fine particles of dry smoke dust, the structure, material, and filtration parameters of the filter cartridge have been carefully optimized to make the filtration effect more accurate.
Fourth, the application industry
Widely used in industries such as welding, metal cutting, polishing, and electronic manufacturing. It can remove the waste residue and stable gases generated during these processes, protect the health of operators, and reduce the occurrence of occupational diseases.
If you have any questions during the use of our welding smoke dust collector product, please call our after-sales service hotline, and we will have dedicated personnel to promptly answer your questions.
