Mine crusher dust collector

The dust collector of the mine crusher is mainly composed of upper and lower boxes, ash hopper, dust removal device, filtration device, blowing device, induced draft fan and other main components. It has the advantages of large dust removal treatment, good purification effect, good operation, space saving installation, and simple daily maintenance. Used together with hammer crushers, Hubei crushers, and impact crushers.

The mining crushing system adopts a mining crusher dust collector to solve the serious problem of dust pollution during machine crushing, separation, and transportation. The dust collector of the crusher is equipped with a dust collection device at the dust point. The dust is sucked into the dust removal box of the crusher through negative pressure for purification, and the dust is separated from the clean air.

The dust collector of the mine crusher uses a centrifugal fan to create a negative pressure area at the dust sealing cover, and sucks the dust into the dust removal equipment. Pulse bag dust collector with dust bag. When the dusty gas passes through the filter bag, the dust is blocked and separated, and the purified gas is discharged through a fan. Blow out the dust on the surface of the filter bag with an electromagnetic pulse valve to make the filter bag fall off. One of its main features is that the compressed air blower is automatically controlled by PLC and does not require human control. Pulse bag filter is not only used for crushing, but also for dust treatment in various industries, achieving good dust removal effects and meeting design requirements. It is currently an ideal dust removal equipment.

The main characteristics of the dust collector for mine crushers are as follows:

1. Dust collectors such as back blowing and pulse spraying in the collection room have the advantages of high air volume, low system resistance, and a dust removal efficiency of 90%;

2. Other dust with high dust concentrations up to 200g/nm3 can be directly treated, while other treated dust with emission concentrations below 50mg/nm3 can also be treated according to user conditions, especially to meet strict emission requirements;

3. According to the properties of coal powder, dust removal methods in the coal powder system are adopted to prevent static electricity (mainly based on actual reports), dust removal bags, and explosion-proof measures (mainly based on actual reports).