36 bag pulse dust collector

Pulse bag filter is a dust removal equipment that uses filtering to retain dust particles in the dusty gas on the fiber fabric, thereby purifying the gas deeply.

The pulse bag filter is composed of an ash hopper, an upper box, a middle box, a lower box, and other parts. The upper, middle, and lower boxes are divided into compartments. During operation, dusty gas enters the ash hopper through the air inlet duct. Coarse dust particles directly fall into the bottom of the ash hopper, while fine dust particles enter the middle and lower boxes upwards with the turning of the airflow. Dust accumulates on the outer surface of the filter bag, and the filtered gas enters the upper box and is discharged into the clean air duct through the exhaust fan to the atmosphere. The dust cleaning process involves first cutting off the clean air outlet duct of the room, so that the bag in the room is in a state of no airflow passing through (stopping the air and cleaning the dust in each room). Then, the pulse valve is opened and compressed air is used for pulse blowing to clean the dust. The shut-off valve is closed for a sufficient time to protect the dust peeled off from the filter bag from settling in the ash hopper after spraying, avoiding the phenomenon of dust adhering to the adjacent filter bag surface with the airflow after leaving the filter bag surface. The filter bag is cleaned thoroughly, and the exhaust valve, pulse valve, and ash discharge valve are fully automatically controlled by a programmable controller.