Single machine bag filter

The single machine bag filter is designed specifically for the top and bottom of cement plants. Designed belt conveyor and local dust source dust removal. It can also be used for local dust removal in other industries. Small size, large air handling capacity, compact structure. The dust above and below the single dust collector can be directly discharged into the warehouse, which has the advantages of convenient use. It can also be directly placed on the belt. The dusty gas enters the top dust collector from the lower part of the dust collector, and after being filtered by the dust bag, the clean air is discharged from the induced draft fan. On the basis of the pulse bag filter, the warehouse top dust collector is a new type of pulse bag single machine dust collector;. To further improve the top dust collector, modifications were made to the original pulse dust collector. The replaced single bag dust collector has the advantages of high processing capacity, stable performance, easy operation, long service life of filter bags, and low maintenance workload.

Installation method of single bag dust collector:

The electric control box cover of the single machine bag filter should not be opened arbitrarily during operation. If you need to adjust the dust removal time or check the circuit, cut off the power after stopping the machine.

2. According to the nature and capacity of dust, regular vibration and vibration should be used to remove dust. Generally, the dust collector works normally with three to four vibrations per shift.

3. Regularly remove dust according to actual needs. When there is dust in the dust collector, simply open the sealed dust removal door and pull out the drawer when the fan and dust removal mechanism stop working.

In order to keep the single bag dust collector in good working condition, it should be placed as close as possible to the source of dust, usually 1.5 to 2.0 meters, with the connecting pipe as short as possible and as few bends as possible to avoid increasing resistance losses.

5. The vacuum hood is a key accessory for the dust collector unit to be in good condition. Users should create an ideal vacuum hood based on the appearance and size of the processed parts, following the principles of accessibility, smoothness, sealing, and design of the vacuum hood.

6. Before the dust collector starts working, check whether the maintenance door, ash discharge door, and air duct connection system are sealed to avoid leakage and reduce the dust collection effect.

7. The voltage of the dust collector is 380 volts three-phase AC. After connecting the external wires on the dust collector to the power supply, it can be used. When the sales are good, pay attention to whether the fan is rotating in the forward direction during the second rotation.