The LCM-D/G type long bag offline pulse dust collector is composed of an ash hopper, an upper box, a middle box, a lower box, and other parts. The upper, middle, and lower boxes are divided into compartments.
When the LCM-D/G type long bag offline pulse dust collector is working, the dusty gas enters the ash hopper through the inlet duct, and the coarse dust particles directly fall into the bottom of the ash hopper. The fine dust particles enter the middle and lower boxes upward with the turning of the airflow, and the dust accumulates on the outer surface of the filter bag. The filtered gas enters the upper box and is discharged to the clean gas collection pipe exhaust duct through the exhaust fan to the atmosphere.
Key Features:
1. The LCM-D/G type offline pulse dust collector adopts the technology of segmented air stop pulse blowing for dust cleaning, overcoming the shortcomings of conventional pulse dust collectors and segmented back blowing dust collectors. It has good dust removal efficiency, low emission concentration, low air leakage rate, low energy consumption, low steel consumption, small footprint, stable operation, and good economic benefits. Suitable for the purification of dusty gases and material recovery in metallurgy, building materials, cement, machinery, chemical, power, and light industry industries.
2. The LCM-D/G type long bag offline pulse dust collector can have multiple structural types (octagonal, circular, etc.) according to different working conditions in the design of the bag cage. The manufacturing of the bag cage has strict requirements. Our company's bag cage is processed on an automated production line through technical cooperation, and its various indicators are about 50% higher than industry standards.
3. Maintenance and bag replacement can be carried out in separate rooms without stopping the system fan and under normal operating conditions of the system. The bag mouth of the filter bag adopts an elastic expansion ring, which is tightly sealed and firm.
4. The LCM-D/G type long bag offline pulse dust collector adopts an upper bag extraction method. When changing bags, the skeleton is extracted, and the dirty bags are put into the lower ash hopper of the box and removed from the manhole, which improves the operating conditions for bag replacement.
5. The LCM-D/G type long bag offline pulse dust collector has a good plate type lifting valve and an offline three state dust cleaning mechanism, with good technology, operation, and dust cleaning.
6. The LCM-D/G type long bag offline pulse dust collector adopts a good programmable controller with three control modes: differential pressure, timing, and manual. It realizes system control of the offline valve, pulse valve, and ash discharge valve of the dust collector. If required, it can also assist in alarm control of sensing components such as temperature and material level on the body.
