XD-II Ceramic Multi tube Cyclone Dust Collector

XD-II ceramic multi tube cyclone dust collector is a dust collector suitable for collecting dry non fiber particle dust. The main feature of the dust collector is that the cylindrical shape is inverted conical, which reduces the possibility of dust gas short circuiting from the center of the cylinder to the outlet. The XD-II multi tube cyclone dust collector is equipped with a conical reflector screen to prevent the separated dust from being re rolled up by the two airflows, and to extract good dust removal efficiency from the rising airflow.

XD-II Ceramic Multi tube Cyclone Dust Collector; Made of cast iron or ceramic, with a thickness greater than 6mm and good energy. Dust collectors are not only suitable for various boiler dust treatment, but also ideal equipment for dust treatment in industries such as metallurgy, mining, building materials, and chemical engineering.

The dust removal efficiency of XD-II ceramic multi tube cyclone dust collector can reach above, and the resistance of the dust collector body is less than 900Pa. The boiler can operate normally through the existing boiler induced draft fan. The dust collector has good load adaptability, with a dust removal efficiency above 70% load.

Working principle of XD ceramic multi tube cyclone dust collector:

The dusty airflow enters the cylinder through the flue. The cylinder is a circular cylinder. Water is injected into the water tank from the top of the dust collector, forming a water film on the entire cylinder wall and flowing from top to bottom. When the smoke enters from the lower part of the cylinder and rotates upward inside the cylinder, the dusty gas always rubs against the water film on the inner wall of the cylinder under the action of centrifugal force, making the dusty gas wet by the water film. The dust particles flow into the bottom of the dust collector with water and are discharged through the overflow hole, sealing the bottom of the cylinder and setting up a water seal groove to prevent smoke leakage from the bottom. There is a cleaning hole for easy cleaning of the bottom of the cylinder. After dust removal, the wastewater is discharged into the sedimentation tank through the bottom overflow hole, neutralized and precipitated, and recycled.

Application and characteristics of XD ceramic multi tube cyclone dust collector:

1. The processing air volume is large, the load adaptability is strong, and the ceramic multi tube dust collector moves smoothly without blockage. Small in size, multiple cyclone dust collectors can be flexibly installed according to the user's on-site situation and local conditions. Can be placed indoors and outdoors.

2. Suitable for dust treatment of industrial boilers and thermal power plant boilers, applicable to various models and combustion methods.

3. For other industrial dust, multi tube cyclone dust collectors can also be used for treatment, and multi tube cyclone dust collectors can also be used to recover practical dust such as cement.

4. Less one-time investment. Compared to electrostatic precipitators, the total investment is relatively small. Compared with water film dust collectors, there is no circulating water, no secondary head, no wastewater discharge, and no water treatment equipment.

XD Ceramic Multi tube Cyclone Dust Collector Technical Parameters: