Frequently Asked Questions-Zhengkang Environmental Protection

Home > Blogs > Frequently Asked Questions >

What are the technical measures for dismantling the scraper conveyor

What are the technical measures for dismantling the scraper conveyor The technical measures for dismantling the scraper conveyor include the following aspects:...

Aug 08, 2025

Steps for Setting and Maintaining the Guidance of Climbing Belt Conveyor

Steps for Setting and Maintaining the Guidance of Climbing Belt Conveyor The core function of the guiding device is to prevent lateral displacement of the belt, avoiding material spillage, belt wear, equipment overload, and even shutdown caused by deviation. Its main components include:...

Jul 24, 2025

Common causes of blockage in air conveying chutes

Common causes of blockage in air conveying chutes The common causes of blockage in air conveying chutes include high material humidity, abnormal breathable layer, foreign object mixing, insufficient air pressure, unreasonable slope design, and improper operation and maintenance....

Jul 19, 2025

The difference between scale conveyor and scraper conveyor

The difference between scale conveyor and scraper conveyor The difference between scale conveyor and scraper conveyor mainly lies in their structure, application scenarios, and applicable materials:...

Jul 15, 2025

Core structure and applicable scenarios of sludge scraper conveyor

Core structure and applicable scenarios of sludge scraper conveyor The sludge scraper conveyor is a device commonly used in sewage treatment plants, sludge treatment stations, and other scenarios to transport sludge with high moisture content and high viscosity. Its working principle mainly revolves around the contin...

Jul 11, 2025

What are the operating procedures and safety hazards of belt conveyors

What are the operating procedures and safety hazards of belt conveyors Check if the device power supply is normal and if the indicator light is on; Confirm that the tension of the conveyor belt is appropriate and there is no looseness or over tension; Clean up obstacles around the equipment and confirm that there are no ...

Jul 06, 2025

The reasons for chain breakage of scraper conveyor are

The reasons for chain breakage of scraper conveyor are The main reasons for chain breakage in scraper conveyors include a combination of factors such as defects in chain material, excessive wear, abnormal load, and improper installation and maintenance....

Jul 01, 2025

What is the difference between pulse dust collector and bag dust collector

What is the difference between pulse dust collector and bag dust collector The core difference between pulse dust collector and bag dust collector lies in the cleaning method and structural design: pulse dust collector adopts a high-pressure pulse jet cleaning system, supports online continuous cleaning, and is suitable for ...

Jun 24, 2025

What are the major tilt angles of screw conveyors

What are the major tilt angles of screw conveyors The large inclination angle of screw conveyors varies depending on the type and design, typically ranging from 20 to 90 degrees. Specifically, the axial tube type screw conveyor can reach 45 degrees, the non axial tube type is about 30 degrees, the U-...

Jun 24, 2025

First Previous [1] [2] [3] 4 [5] [6] [7] [8] [9] Next Last

Information

Tel: 15533772966
E-mail: wa8615533772966@gmail.com
Add: No. 2 Road, Botou Economic Development Zone, Cangzhou City, Hebei Province

Follow Us

Copyright © Zhengkang Environmental Protection All Rights Reserved Sitemap | Technical Support