Serrated crushing screw conveyor

The serrated crushing screw conveyor is a device used for conveying and crushing materials, which uses the rotation of spiral blades to push materials and utilizes serrated structures to crush materials.

When using a serrated crushing screw conveyor, the following points should be noted:

Pre start inspection: Confirm that there are no materials or debris inside the casing, check if the motor power cord is connected correctly, and if the power supply voltage is normal.

Operation process: After starting the motor, observe the current and start feeding normally. The feeding speed should gradually increase to the rated conveying capacity, and the feeding should be kept uniform to avoid blockage caused by intermittent feeding.

Safety measures: A sieve should be added to the feed inlet to prevent metal debris from entering. Before starting up, confirm that the box cover is securely closed and do not remove it during operation to prevent dust from flying.

Maintenance: Regularly check the lubrication of bearings, temperature, oil level, and noise of motors and reducers, and add lubricating oil or replace worn parts in a timely manner.

By following the above steps and precautions, the long-term stable operation of the serrated crushing screw conveyor can be protected.