Every product we manufacture must undergo strict testing and inspection. The specifications of the mobile spiral loading machine are as follows:
The mobile spiral loader is a flexible continuous conveying equipment with a spiral auger structure. It is mainly used for loading, unloading, transferring and lifting of granular and powder materials such as grains, feed, fertilizers, sand, and stones at an appropriate speed.
The entire machine is equipped with walking wheels or traction devices, allowing for movable and interchangeable positions without the need for fixed installation. The loading and unloading efficiency of bulk materials can be customized according to requirements. It rotates the spiral blades driven by the motor to push the materials forward along the cylinder. It features simple operation, flexible movement, appropriate feeding speed, good sealing performance, low dust, and strong adaptability to the site. It is mainly applied in scenarios such as grain purchasing stations, feed mills, building material factories, mines, logistics loading and unloading, etc., significantly improving the loading and unloading efficiency of bulk materials.
Safety precautions for the portable spiral loading machine?
Pre-check before startup
Check whether the spiral blades, barrel, motor, chain, and foot wheels are in good condition and firmly installed. Ensure that the power cord is undamaged and that all fasteners are not loose.
Prohibit empty or overloaded operation
Try to avoid prolonged idling; ensure the feeding is uniform to prevent excessive material from getting stuck in the auger and damaging the motor.
Material Requirements
It should not be mixed with hard objects such as iron blocks, stones, strips of cloth, or iron wires, to prevent the leaves from deforming and the equipment from being damaged.
Mobility and Fixity
When moving, stop the machine and cut off the power supply first, and proceed slowly; before operating, make sure to secure the equipment firmly to prevent it from sliding or tipping over.
Physical safety
During operation, it is strictly prohibited to put hands or tools into the barrel. Before cleaning or maintenance, make sure to turn off the power supply and hang a warning sign.
Rainproof and moisture-proof (based on actual reports) (based on actual reports)
The motor and the electrical control box are equipped with rainproof measures. When used outdoors, they should be covered with a rainproof tarp to prevent leakage and short circuits.
Abnormal shutdown
If there is any abnormal noise, excessive vibration, jamming, tripping, etc., immediately stop the machine for inspection. After the fault is resolved, it can be used again.
Daily maintenance
Regularly apply lubricating oil to the bearings and chains; promptly remove any residues to prevent the barrel from caking and corroding.
With a customer service team and a complete after-sales service system, we ensure that the mobile spiral loading machine products you purchase will be both safe to buy and reliable to use. All our employees sincerely welcome your inquiries and purchases.
