Drum humidification mixer

Characteristics of drum humidification mixer:

1. The pneumatic mixer can adjust the speed. The output power and speed of the motor can be adjusted by controlling the opening of the intake valve or exhaust valve, that is, the compressed air flow rate. It can achieve the purpose of adjusting speed and power.

2. Pneumatic mixers can rotate in either forward or reverse direction. As long as the valve is operated to simply change the intake and exhaust direction of the pneumatic motor, it is possible to achieve forward and reverse rotation of the output shaft of the pneumatic motor and immediately change the direction.

3. The working environment of pneumatic mixers is not affected by vibration, high temperature, or electromagnetic effects, and is suitable for harsh working environments under unfavorable conditions such as flammability, explosiveness, high temperature, vibration, humidity, and dust.

4. The pneumatic motor matched with the pneumatic mixer has overload protection function and will not malfunction due to overload. When overloaded, the pneumatic motor only stops rotating. When overloaded, it can operate normally again without causing damage to parts or other malfunctions. It can operate continuously at full load for a long time, and the temperature rise of the pneumatic motor is relatively small.

5. Pneumatic mixers have high starting torque and can be started directly with load. The starting and stopping speed is uniform, and it can be started with load. Sometimes it does not burn like an electric mixer, which affects its use.

6. The pneumatic mixer is easy to operate and maintain. Pneumatic motors have a simple structure, small size, light weight, and high horsepower. Using air as the medium, it is easy to operate and maintain.

Dust control:

The places where concrete mixing plants are prone to generating dust are mainly the feed inlet, material yard, and powder tank of the mixing building. The mixing tower using dust overflow equipment is a closed mixing system. In order to further generate dust, an active color steel plate is added as the dust surface, and a closed dust removal port space is used to control the dust generated in the enclosed space for treatment. Add two symmetrical water mist pipes at the cement feed inlet to prevent dust from spreading from the source. The spray device is mainly installed in the * * part of the stock yard. When the yard is dusty, spray dust can be controlled manually or automatically, and automatic high-pressure water curtain can also be installed at the entrance of the yard. Dust overflows.

Wastewater treatment: