Double axis humidification mixer

Our company is a manufacturer that integrates design, production, and manufacturing. The use of our dual axis humidification mixer products is becoming increasingly widespread. The details are as follows:

Good sales, working principle

The transmission device drives two blade shafts with stirring blades to rotate synchronously. When the material enters the tank from the feeding port, the water spray device immediately sprays water to make the material change from dry to wet. At the same time of humidification, under the action of the spiral stirring blades, the wet materials are continuously stirred and mixed with each other, and move towards the discharge port. Qualified materials are discharged from the discharge port.

Excellent, structural composition

Shell: mainly composed of plates and steel sections, welded and formed in the factory, it is the support of the double shaft mixer, tightly sealed, and can prevent fly ash from flying out and leaking.

2. Spiral shaft component: It is the main component of a dual axis mixer, including left and right rotating spiral shafts, bearing seats, bearing sleeves, bearing covers, gears, sprockets, oil cups, blades, and other components.

3. Drive device: generally composed of a motor, reducer, coupling, etc. Provide power for the rotation of the spiral shaft. Different series of double axis mixers have different driving devices. For example, the motor is used for ZJ series double shaft mixers. The SJ series double shaft mixer with hydraulic coupling adopts a hard toothed reducer. Pneumatic clutch soft tooth surface reducer.

4. Water addition and humidity control piping: mainly composed of connecting pipes, joints, and nozzles. The nozzle adopts a stainless steel atomizing cone nozzle, which is arranged above the mixer housing and arranged axially along the spiral axis to form a water curtain, which is conducive to the humidification and mixing of materials. The moisture content of wet ash can be adjusted by operating the manual regulating valve on the water supply pipe.

5. Cover plate: including left cover, middle cover, right cover, hole cover, maintenance hole cover, etc. There are usually six inspection holes on both sides of the double shaft mixer for easy maintenance and upkeep by operators.

3、 Characteristics

1. Good environmental friendliness: The entire mixing and transportation process is carried out in a closed space without dust leakage. The shaft end adopts a combination of labyrinth and packing seals, which play a dual sealing role, have good sealing effect, and are clean and environmentally friendly.

Good efficiency: integrating mixing, humidification, and transportation, with good mixing uniformity, high production efficiency, and high production capacity.

Good performance: The mixing blades are made of wear-resistant (based on actual reports) materials and have undergone special surface treatment. For example, the blades of the ZJ series double axis mixer use Q355B overlay carbide wear-resistant (based on actual reports) layer, which has good performance and can extend the service life of the equipment.

Stable operation: The whole machine has a compact structure, occupies a small space, has stable transmission, good performance, and low noise.

Fourth, the application industry

1. Power industry: mainly used for humidification and mixing of fly ash in thermal power plants. Dry ash can be made into wet ash with a moisture content of about 25%, which is convenient for shipping and transportation. It can also be made into mortar with higher concentration and processed through shipping or belt transportation.

2. Chemical industry: used for humidifying, stirring, and transporting powdered materials or materials containing solid particles in chemical production processes, such as mixing and stirring various chemical raw materials.

Mining: It can humidify and mix materials such as powdered ore and coal gangue generated during the mining process, facilitating subsequent transportation and processing.

4. Building materials industry: For example, in cement production, humidifying and mixing cement raw materials can protect the quality and process requirements of cement production, and can also be used to mix clay, shale and other materials in the ceramic industry.

Our company adheres to the business philosophy of "daring to explore and innovate". We welcome new and old customers to come and inspect the production and manufacturing of double axis humidification mixers. We also welcome you to call us for consultation at any time. We look forward to cooperating with you.