Dual axis dust humidification mixer

With the development and progress of the economy, our company's dual axis dust humidification mixer products are also being updated, and their specifications are as follows:

Good sales, working principle

1. Material conveying and stirring: When dry powder material enters the tank through the feeding port in a quantitative and uniform manner, the power transmission machinery drives the spiral main shaft equipped with multiple sets of blades to rotate. The passive spiral shaft is driven by the meshing transmission gear to rotate relative to the main shaft at a constant speed, so that the material is stirred and pushed into the humidification section of the tank.

2. Water atomization: After the material is pushed into the humidification section, the humidifier automatically sprays dry ash material. The water is evenly sprayed on the material through a reasonably arranged nozzle, forming a water curtain mist, which is conducive to the humidification and mixing of the material.

3. Adequate mixing and discharging: After spraying the wet material into the tank, the mixing section thoroughly mixes the water and dust. After the dry ash reaches a controllable humidity, it is discharged from the discharge port.

Excellent, structural composition

Transmission machinery: including the main motor and cycloidal pinwheel reducer, providing power for equipment operation and driving the spiral mixing shaft to rotate.

2. Spiral mixing shaft: The active and passive spiral mixing shafts are equipped with multiple sets of blades, usually using left and right rotating spiral shafts with high manufacturing accuracy requirements. Constant speed relative rotation is achieved through gear transmission to stir and propel materials.

3. Tank body: composed of plates and steel sections, it is the supporting structure of the equipment. The internal space is used to accommodate materials, mix and humidify. The shell is tightly sealed to prevent dust from rising and leaking.

4. Humidifier: mainly composed of connecting pipes, joints, and nozzles. The nozzle is arranged above the mixer housing and arranged axially along the spiral axis direction. The flow rate and pressure of water can be adjusted by operating the valves on the water supply pipe to meet different humidification needs.

Feed inlet: The feed inlet is located at the top and is used to receive dry powder materials; The discharge port is located at the bottom and is used to discharge the humidified and stirred material.

6. Base frame: used to support the entire device and ensure stable installation on the foundation. The base frame should be located on the foundation plane and fixed with foundation bolts or welded with embedded plates.

Thirdly, there are distinctive advantages

Mixing: Two sets of spiral blades are used for mixing, with good mixing efficiency and suitable speed to evenly mix powdered materials and push them to the discharge port.

2. Excellent sealing: The shaft seal adopts a combination of multi slot labyrinth and packing to prevent dust leakage. The shaft wear is light, and the sealing of each joint surface of the equipment is tight, running smoothly without flying ash.

Uniform humidification: With special atomizing nozzles and an adjustable water supply system, the water spray volume can be adjusted according to the material quantity and humidity requirements to ensure uniform humidification of the material.

Performance: The mixing rod and shell lining are usually made of iron-based wear-resistant (based on actual reports) alloy or composite ceramics, and the spiral blades are also made of high wear-resistant (based on actual reports) special alloy, which has a long service life and reduces equipment maintenance and replacement costs.

5. Flexible layout: There are two forms: chain drive and direct connection. The transmission mechanism adopts a cycloidal reducer, and the overall layout of the equipment is flexible, which can be installed and adjusted according to the actual situation on site.

6. Easy operation and maintenance: The spacious flip maintenance door makes maintenance work comfortable and easy. The manual pressure oil pump supplies lubricating oil to four transmission bearings, which is convenient for equipment use and maintenance. The electronic control system is flexible and excellent, and the operation is safe and simple.

Fourth, the application industry

1. Power industry: mainly used for humidification and mixing of fly ash in thermal power plants, to make dry ash into wet ash with appropriate moisture content, which is convenient for loading and transportation or further processing, and to avoid dust and environmental pollution caused by fly ash during transportation and loading and unloading.

Metallurgical industry: In steel mills, ironworks, etc., it is possible to humidify, stir, and transport powdery materials such as slag and dust, which is beneficial for environmental protection and subsequent processing.

3. Chemical industry: Suitable for humidifying, stirring, and transporting various materials containing solid particles in chemical production, such as carbide mud, gypsum ash, etc. It can change the fluidity and processing performance of materials.

4. Mining industry: used for humidifying and stirring powdered ores, tailings, etc. During mining and processing, dust is generated to prevent it from flying and facilitate the transportation and storage of materials.

Building materials industry: In the processes of cement production, coal production, etc., powdered raw materials are humidified and mixed to meet production process requirements and improve product quality.

After receiving our dual axis dust humidification mixer product, our customer service is available 24 hours a day to provide consultation services and solve after-sales related problems for you. We look forward to working with you.