XMC type pulse single machine dust collector

XMC type pulse single machine dust collector

XMC pulse single machine dust collector

The structure and characteristics of XMC pulse single machine dust collector improve dust removal efficiency and adaptability, and extend the service life of filter bags. Through production theory, the equipment operates unchanged, requires minimal maintenance, and has high combination limitations, earning high praise from users. This series of products can be widely used in dust removal systems such as asphalt mixing building crushing, grinding machines, dryers, kilns, etc. Polyester needle felt is generally used as the filter bag material for dust collectors. If the filter bag is made of Metas high-temperature needle felt, it can withstand temperatures up to 204 ℃ at 120 ℃.

XMC pulse single machine dust collector; Combining the advantages of various pulse jet dust collectors, it overcomes the disadvantages of insufficient dust removal intensity and uneven distribution of inlet and outlet air, and expands the application range. This product is widely used in the dust removal system of asphalt mixing plants, such as crushers, grinders, dryers, kilns, etc.

The working principle of XMC pulse single machine dust collector:

When dusty gas enters the dust collector from the inlet, it first encounters the inclined plate and baffle in the middle of the inlet, and the airflow turns to the ash hopper, slowing down the airflow speed. Due to inertia, coarse dust particles in the gas flow directly into the ash hopper. The function of pre collecting dust. The airflow entering the ash hopper then folds and captures the dust on the outer surface of the filter bag through the filter bag with a metal frame inside. The purified gas enters the clean room at the upper part of the filter bag chamber and is collected at the air outlet for discharge. In the process of filter bag purification, as time increases, more and more dust adheres to the filter bag, resulting in an increase in the resistance of the filter bag and a gradual decrease in the processing air volume. During normal operation, the resistance within the range of 140-170mm water column should be controlled. At this point, when the resistance rises to a limited range, the pulse controller sends a command to trigger each control valve to open the pulse valve in sequence. The compressed air in the airbag is sprayed into the corresponding filter bag through the nozzle hole and the Venturi tube. The filter bag immediately expands rapidly, causing dust adhering to the surface of the filter bag to fall off and the filter bag to detach. Remove the dust and drop it into the ash hopper, and discharge it out of the machine through the ash discharge system. Remove dust from falling into the ash hopper and discharge it out of the body through the ash discharge system. Therefore, the dust attached to the filter bag is blown with periodic pulses to ensure the normal passage of purified gas and the normal operation of the dust collector.

Characteristics of XMC pulse single machine dust collector:

1. On the basis of retaining the advantages of the original MC dust collector, XMC pulse single machine dust collector adopts the import and export form of Japanese TBF pulse bag dust collector. The import and export are arranged at both ends of the dust collector. The separation air duct in the middle of the dust collector is equipped with a separation device, which improves the quality of the equipment and the service life of the filter bag.

2. Improved the fixing method for replacing the bag door cover and filter bag, facilitating equipment maintenance and further extending the service life of the filter bag.

3. Due to the improvement of the structure, the tightness of the equipment is greatly reduced by less than 10% air leakage, and the product quality requirements are further increased.

4. The compressed air has been reduced from the original 57kg/cm2 pressure to the current 34kg/cm2 pressure, but the dust cleaning effect can still achieve the effect of 57kg/cm2 pressure, thus expanding the range of use.

5. The original agitator shell was removed and replaced with an agitator ash hopper, which expanded the cleaning effect, sealed tightly, discharged ash quickly, and reduced maintenance costs.

XMC pulse single machine dust collector

XMC type pulse single machine dust collector