Customized unloader for processing

Customized unloader for processing

Customized unloading machine for processing

Customized star shaped unloader for processing; It is the main equipment for feeding dust and air supply in dust removal equipment, suitable for both powdered and granular materials.

The customized unloading machine is the main equipment for feeding dust removal equipment, suitable for powder materials and granular materials. Classification: Unloaders are mainly divided into A-type unloaders and B-type unloaders.

Unloading machines are divided into three categories: ordinary type, pressure resistant type, and high temperature resistant type (mainly based on actual reports) (mainly based on actual reports). The unloader can be driven at a constant speed, continuously discharging materials according to a controlled rate, or driven at an indefinite speed. The unloader is used as a feeder.

Ordinary unloader type: It can be used for ordinary materials below 150 degrees Celsius and at room temperature, and can continuously and uniformly supply the feeding pipe directly. It can also be used as a system and separation dust removal part unloader.

Unloader pressure resistant type: using a closed rotor, it can be widely used in suction pressure airflow conveying systems and negative pressure conveying equipment. The rotating unloader can protect the airflow pressure inside the conveying pipe from leakage. Therefore, in this regard, it is called Wanlock gas, which can not only withstand pressure, but also has ordinary functions.

Characteristics of the unloader:

(1) The unloader adopts the principle of planetary rotation, with input and output on the same axis, directly connected to the motor, compact structure, beautiful and novel appearance, small volume, and light weight.

(2) The unloader operates stably, with low noise, few malfunctions, and a long service life. The gear components are made of ductile iron and bearing steel. Good performance, good performance.

(3) Bearings, gearboxes, and valves should be kept away from the valve body to avoid the influence of high temperature dust. The front and rear end caps have good sealing performance to prevent dust leakage and extend the service life of motor components and lubrication systems.

(4) The unloading equipment has good overload capacity and inertia torque, suitable for frequent starting and reverse rotation.

(5) If the user requires special specifications, we can manufacture unloading machines such as motors and chain wheel drives.

Customized unloading machine for processing

Customized unloader for processing