rotary feeder

Precautions for using a rotary feeder:

1. Before using the star shaped unloader, check the quantity and type of lubricating oil in the reducer, replace it with new oil after one month of operation, and replace it once a year.

2. Connect the air source interface, check if the interface is blocked by foreign objects, and if the interface is clean;

3. Using a star shaped unloader; Please use the star shaped unloader to confirm that the rotation direction of the rotor is clockwise (extending from the reducer to the shaft end, consistent with the arrow on the sprocket cover);

4. Before using the star shaped unloader, open the sprocket cover to check the tension of the chain, and regularly check it during operation; At the same time, apply appropriate lubricating grease on the chain and sprocket;

5. During the whole use of the unloader, adjust the pressure reducing valve so that the sealing pressure is 0.05MPa higher than the material pressure in the valve body, and the gas is oil-free, dry compressed air;

6. The gas source at the sealed area always exists throughout the entire use of the star shaped unloader, and can only be closed after confirming that the valve has stopped running.