Fly ash humidification mixer
Fly ash humidification mixer, also known as humidification mixer. This equipment is used for humidifying, stirring, and transporting ash hoppers in departments such as thermal power plants. It is also used for wet water spraying, stirring, and transporting powders, as well as for humidifying, stirring, and transporting chemical and mining industries containing solid particles. The humidifying mixer uniformly feeds the material into the main machine through two sets of spiral blade machines, and forcefully mixes and stirs the dry ash powder material into the mixing tank and mixing tank with the water supplied by the water supply device. At the same time, the material that meets the humidity requirements is transported to the discharge port for discharge.
Product Features
The humidifying mixer consists of four parts: uniform feeding, blade feeding, mixing and striking humidification, vibration system, etc., and is equipped with special electronic control and water supply system. The entire device is fixed on the base, and the cylinder is supported by four sets of elastic elements. Through the vibration device, the cylinder vibrates at high frequency during the operation of the whole machine, maintaining a certain gap between the cylinder wall and the mixing shaft, greatly reducing the running resistance of the whole machine and eliminating the need for stuffiness. The humidification mixer has the characteristics of compact structure, good overall performance, excellent technology, reasonable process, good performance, good sealing performance, adjustable water volume, small wear, large processing capacity, long service life, continuous operation, and low failure rate.
working principle
The humidifying mixer uniformly feeds the material into the main machine through two sets of spiral blade machines, and forcefully mixes and stirs the dry ash powder material into the mixing tank and mixing tank with the water supplied by the water supply device. At the same time, the material that meets the humidity requirements is transported to the discharge port for discharge. Before starting the humidification mixer, carefully check whether all parts are diverse, whether the fasteners are tightened, and whether the sealing parts are tight. Inject machine oil No. 30 or No. 40 into the humidifier mixer reducer, and users can also choose the appropriate lubricating oil according to local conditions for normal operation. The humidifying mixer should first stop feeding, water supply, and shutdown, and then stop after the materials inside are unloaded.
