Dual axis dust humidification mixer

The dual axis dust humidification mixer can be used not only as a dust collector in thermal power plants, but also in industries such as chemical, metallurgical, mining, and building materials. By controlling the amount of water added, the dry powder material is humidified and mixed to an appropriate humidity level to avoid environmental pollution caused by dust flying during transportation and loading and unloading of the dry powder material.

Characteristics of dual axis dust humidification mixer:

1. This device uses two sets of spiral blades for stirring, with a small stirring area. The spiral blades are made of high specialty alloys or composite ceramics, and have a long service life.

2. The device adopts a cycloidal pinwheel reducer for transmission, with smooth rotation and low noise.

3. The device is fed from the top and bottom, with a reasonable structure. The joint surfaces of the dual axis humidification mixer are tightly sealed and operate smoothly.

4. This dust humidifier; Equipped with a humidification spray system, the water is evenly sprayed. By adopting a designed double casing structure and combining the characteristics of gas-solid two-phase flow in the pipeline during pneumatic ash conveying, continuous interference and automatic dredging of fly ash deposition or blockage in the pipeline can be achieved. It has the advantages of clever conveying mechanism, good performance, low conveying and flow rate, and low wear.

5. At the same time, improving the pneumatic ash removal system and performance, saving energy and water, reducing land occupation and comprehensive utilization of fly ash. Adjust the water supply to meet the demand.

6. This equipment adopts a manual oil pump to provide four types of transmission bearing lubricating oil, which is convenient for the use and maintenance of the equipment and has the advantage of saving time.

Structure and working principle of dual axis dust humidification mixer:

The dual axis dust humidification mixer is fixed on a bracket. When the machine is working, the impeller feeder evenly inputs the warehouse dust into the main machine, and then enters the ratchet mixing cylinder through high-speed blades. The high-speed ratchet forcibly mixes the dust and limited water. During the mixing and dispersion process, the humidity standard mixture inlet and outlet are given in advance to solve the problem of secondary dust. The blades and stirring rods are both made of materials, which improves their service life.