Working principle of bucket elevator

The bucket elevator is suitable for lifting from low to high. After the provided materials enter the hopper through the vibration table, the machine automatically runs continuously and transports upwards. The transmission speed can be adjusted according to the transmission volume, and the height can be increased as needed. The hopper is self-designed and manufactured. This type of bucket elevator widely uses PP hoppers. All dimensions are designed and manufactured according to actual needs. It is designed for supporting vertical packaging machines and computerized measuring machines. Suitable for promoting and feeding products such as food, medicine, chemical products, screws, nuts, etc., the automatic stop of the machine can be controlled by signal recognition of the packaging machine.

The hopper scoops up the material from the storage below, and as the conveyor belt or chain rises to the top, it flips down around the top wheel, and the bucket elevator pours the material into the receiving trough. The transmission belt of bucket elevator generally adopts rubber belt, which is installed on the lower or upper moving roller and the upper and lower turning roller. Chain bucket elevators are generally equipped with two parallel transmission chains, with a pair of transmission chain wheels on the top and bottom, and a pair of directional chain wheels on the bottom or top. The bucket elevator is usually equipped with a casing to prevent dust from flying in the bucket elevator.

Bucket elevator: suitable for lifting from low to high. After the material is supplied to the hopper through the vibration platform, the machine automatically runs continuously and transports upwards.