The correct usage of star shaped unloader

The correct usage of star shaped unloader

The correct use of star shaped unloaders includes preparation before operation, operating steps, precautions, and maintenance.

Preparation work before operation

Inspection equipment: Confirm that all components of the star shaped unloader (such as motor, reducer, housing, impeller, main shaft, bearings, etc.) are intact and not loose.

Determine materials: Check whether the particle size and humidity of the material to be unloaded meet the equipment design requirements.

Safety protection: Operators should wear safety helmets, work clothes, gloves and other labor protection equipment.

Excellent, operation steps

Start the equipment: Turn on the power switch, start the motor, confirm that the direction of the motor's operation is consistent with the direction indicated on the equipment, observe whether the equipment is running smoothly, and stop immediately if there is any abnormality.

Material feeding: The material to be unloaded is evenly fed into the star shaped unloader through the feeding port, and the feeding speed is adjusted to avoid affecting the unloading effect too fast or too slow.

3. Unloading process: Observe the rotation of the impeller, confirm that the material is evenly fed into the unloading port, adjust the height of the unloading port, and confirm that the material is evenly unloaded. If it is found that the unloading is not smooth, the feeding speed or equipment operating speed can be adjusted appropriately.

Stop operation: When the material is unloaded or the operation is completed, turn off the power switch, stop the motor, clean the equipment, and confirm the stable performance of the material.

Note 3

Prohibit overload operation: Overloading operation is prohibited to avoid damaging the equipment.

Pay attention to material properties: Adjust the feeding speed and discharge port height according to the material properties to protect the discharge effect.

Regular inspection: Regularly inspect all components of the equipment and promptly handle any abnormalities found.

Maintenance: Conduct regular maintenance according to the equipment manual to ensure long-term stable operation of the equipment.

5. Enron measures: Operators need to undergo training and be familiar with the operating procedures and Enron knowledge of the equipment; It is strictly prohibited to touch the rotating parts during the operation of the device; Prohibit placing flammable and explosive materials around the equipment; If any abnormalities are found in the equipment, immediately stop the operation and report to the maintenance personnel in a timely manner.

Maintenance and upkeep four, upkeep

1. Lubricating oil replacement: The star shaped unloader has been injected with lubricating oil before leaving the factory, and the grease needs to be replenished or replaced within 6-10 months after use, especially in high ambient temperatures, high humidity, or high dust.

Equipment installation and debugging: Before installation, the site should be cleaned, the flatness and firmness of the foundation should be checked, and the connection of each component of the equipment should be confirmed to be tight and flexible in rotation.