Workshop desulfurization and dust collector

The workshop desulfurization and dust collector is an important desulfurization equipment for turbocharging turbulent dust removal and desulfurization technology. Its working principle is: under the action of the turbocharging turbulence device, sulfur-containing gas rotates and diffuses at high speed, and absorbs the innovative service of turbulent mass transfer formed by the slurry. The mass transfer process is to form an emulsion layer between gas and liquid, which not only neutralizes the chemical absorption quickly, but also keeps the liquid film close to neutrality, maintaining a high and stable mass transfer rate throughout the process. Therefore, it is a good low resistance desulfurization equipment.

The turbocharging turbulent mass transfer desulfurization equipment technology is the third generation product of this technology. Its technical core is based on the theory of permeation surface renewal and various turbulent mixing strong mass transfer mechanisms, separating dust particles, dust and non dust from gas, air or exhaust gas with clinical effects as the main body. It has dust removal and desulfurization technology, which is characterized by integrated dust removal and desulfurization, low energy consumption, small footprint, simple operation, good efficiency, low operating cost, no blockage, no scaling, stable system operation, and small pressure resistance loss. Suitable for various sulfur fixing agents. Wet dust removal and desulfurization technology is at a guiding level in many regions. Wet dust removal and desulfurization technology is at a guiding level in many regions. And achieve zero emission performance in the application of coal-fired industrial boilers.

The desulfurization equipment is widely used in the desulfurization and dust removal industry of coal-fired boilers. It can adopt wet dust removal, wet desulfurization, and integrated dust removal and desulfurization. It is not only suitable for dust removal and desulfurization of coal-fired circulating fluidized bed boilers in power plants, but also for wet desulfurization and dust removal of coal-fired chain boilers, flue gas purification, sulfur dioxide efficiency, exhaust gas purification, hydrogen fluoride, kiln exhaust gas acid exhaust gas purification equipment, ball and sintering machine exhaust gas desulfurization. The desulfurization agent waste ammonia water has good purification efficiency, and the original flue gas SO2 is removed from 1000mg/m3 to below 120mg/m3, which is widely used in the steel plant pellet flue gas industry. The purification efficiency of desulfurizer waste ammonia water is good. The removal of SO2 from raw flue gas from 1000mg/m3 to below 120mg/m3 is widely used in the pellet flue gas industry of steel plants. It is an environmentally friendly product for low resistance wet dust removal and desulfurization equipment and new desulfurization equipment. Dust collector is a device used to remove unwanted dust in the gas phase, and on this basis, it increases the desulfurization effect, that is, desulfurization dust collector.

The desulfurization and dust collector is generally a wet desulfurization and dust collector, which includes water film desulfurization and dust removal, impact bath desulfurization and dust removal, etc.

The advantage of wet dust removal is that it is easy to maintain and can prepare different dust removal agents to achieve the effect of dust removal, desulfurization (denitrification); The disadvantage is that the dust removal solution needs to be treated, which may cause secondary pollution.

After long-term improvement, various types of water film desulfurization and dust removal devices have been developed, such as cyclone plates, cyclone columns, floating balls, and sieve plates. The equipment technology is becoming increasingly mature, each with its own advantages and disadvantages. Enterprises can choose different types according to their own needs.