Five steps and debugging methods for installing LS screw conveyor

Many merchants do not know how to install and debug the screw conveyor after receiving it. Today, the editor will provide a detailed introduction to the installation steps of LS screw conveyor, including preparation work, foundation fabrication, installation of frame, installation of spiral tube, installation of motor, etc. Each step has been explained in detail, and the operation steps are simple and easy to understand, which can help users install screw conveyor equipment at a suitable speed.

1、 Preparation work before installation

1. Clean and inspect the equipment to ensure that all parts are free from damage, rust, and deformation.

2. Prepare the necessary tools and materials based on the model and specifications of the screw conveyor equipment.

3. Check the on-site environmental information of the equipment installation location to ensure that the environmental factors related to the installation of the screw conveyor have no impact.

2、 Basic production

1. Select a location on the installation site and measure the foundation size of the screw conveyor.

2. Make the foundation of the screw conveyor and accurately meet the installation requirements of the screw conveyor equipment.

3、 Install the rack

When installing the rack, the first step is to assemble the rack.

2. Choose the wheels that match the rack according to the size of the equipment.

3. Roll the rack to the designated installation position.

4、 Install spiral tube

1. Install the spiral tube and inlet/outlet of the screw conveyor onto the frame according to the design requirements.

2. Confirm the installation position and use specialized spiral tube installation tools for adjustment and installation.

5、 Install the motor

1. According to the motor specifications of the equipment, select the motor and directly connect it to the spiral tube.

2. Confirm if the motor starts normally and check if all components of the motor drive are secure and free from abnormal vibrations.